0 people own this 0 people want this
Add to Studio Add to profile
MC2 Stereo Compressor
Gear > Joemeek > MC2 Stereo Compressor
last edit: Recording Questions 786 day 19 h
About
-
About:
The MC2 is a professional studio-quality stereo compressor in a compact half-rack format. Simple to use yet extremely powerful, the MC2 by Joemeek will bring out the best in any line-level stereo material and give the gloss of a professional studio to all your performances. It can be used for both recording/mastering, and live work.Think of the MC2 as three separate pieces of equipment:
•A line level stereo preamplifier
•A stereo Joemeek compressor
•A stereo width processor
-
Specs:
Input impedances: Line: 20kohm
Pre-amp overall gain: 6dB to 15dB
Common mode rejection: 70dB
Equivalent input noise: 95dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 10Hz to 70kHz (-3dB)
Maximum input before clipping: +19.5dBu
Headroom before clipping: +19.5dBu
Compressor threshold: 6dBu to +22dBu (variable)
Compressor ratio: 1:1 to 10:1 (variable)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
Nominal output levels: +4dBu/-10dBv
Output impedance: 75ohm
Output Level switch: 12dB attenuation
Noise Floor: 95dBu (typical, with 0dB Input and Make Up gain)
VU Meter: 8 segment bargraph
Power supply:12V ac mains adaptor
Power consumption: 12W
Dimensions (W x H x D): 8.66" x 1.73" x 7.0", 220 x 44 x 180 mm
Weight: 2.20 lbs., 1 kilo
GR Hold Threshold: 10dBu to -50dBu (variable)
Stereo Width Range: Mono/stereo/wide stereo (variable)
GR Meter/VC Meter: 8 Segment bargraph
-
Add a New Link
Gear Review Sites
-
Add Your Review
